Tuesday, April 28, 2020

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 682

2010 Cadillac Truck SRX AWD V6-2.8L Turbo Page 682



Repair Instructions



Perform the Diagnostic Repair Verification (See: Verification Tests) after completing the diagnostic procedure.



* Radio Control Switch Replacement - Steering Wheel (See: Accessories and Optional Equipment/Radio, Stereo, and Compact



Disc/Radio/Stereo/Service and Repair/Radio Control Switch Replacement - Steering Wheel)



* Control Module References (See: Testing and Inspection/Programming and Relearning) for BCM replacement, setup, and programming



B3650



DTC B3650



Diagnostic Instructions



* Perform the Diagnostic System Check - Vehicle (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic System



Check - Vehicle) prior to using this diagnostic procedure.



* Review Strategy Based Diagnosis (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Strategy Based Diagnosis) for an



overview of the diagnostic approach.



* Diagnostic Procedure Instructions (See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnostic Procedure



Instructions)provides an overview of each diagnostic category.



DTC Descriptor



DTC B3650 08



- High Beam Request Signal Circuit Performance - Signal Invalid



Diagnostic Fault Information



Circuit/System Description



The BCM monitors the voltage level within the high beam signal circuit and the flash to pass signal circuit. When the turn signal/multifunction



switch is moved to the high beam position or to the flash to pass position, the voltage within the appropriate signal circuit drops to less than 1 V.



The BCM will detect the voltage drop and will command the headlamp high beams to turn ON or OFF.



Conditions for Running the DTC



Battery voltage must be between 9-16 V.



Conditions for Setting the DTC



The BCM detects a short to ground in the headlamp high beam signal circuit.



Action Taken When the DTC Sets



The high beam headlamps will malfunction.



Conditions for Clearing the DTC



* The DTC will be current for as long as the fault is present.



* When the fault is no longer present, the DTC will be a history DTC.



* A history DTC will clear after 50 ignition cycles.